Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001

Rinser

• Automatic CALIPSO 63mm Ø 2,450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle.
• 2 channel rinser for steam sterilisation.
• Support structure completely covered with AISI 304 stainless steel sheets.
• AISI 316 stainless steel gripper elements with jaws made of food-grade material.
• AISI 316 stainless steel spray nozzles and spray valves.
• Stainless steel drip tray with drain line, pressure reducer for rinsing agent, total treatment time at 15,000 bph = 12 seconds

Filler

• Low vacuum filling machine model ENOICA 72 Ø 2800 mm with 72 filling valves.
• Ring bowl, completely made of stainless steel AISI 304, bowl bottom with slope,
  filling valves completely made of stainless steel AISI 316.
• Electric filling bowl height adjustment by push buttons on the control panel of the machine, 
• Electronic filling level probe Endress-Hauser for controlling the wine level in the filling tank.
• Vacuum system in the tank consisting of a vacuum pump, vacuum gauge and valve for regulating the vacuum.
• Product inlet from below, the inflow being regulated by a pneumatic valve or the probe in the filling tank, bottle lifting cylinder working pneumatically/mechanically,
  completely made of stainless steel AISI 304.
• Lubrication station for manual lubrication by means of lubrication nipples and oil dispersion.
• The screw caps are placed directly at the outlet star of the filler to prevent gas
  exchange in the bottle neck.
• Additional sensors for monitoring the bottle outlet.
• Easy and precise height adjustment of the cap placement position by means of a hand wheel.

Corker

• Capping turret model DELTA 612 R with 12 heads for processing with natural corks for still wine.
• Cork feeding from above complete with cork feeding device.

Screw Capper

• Screw capping turret model SIGMA 512 with 12 capping heads for processing with aluminum screw caps and 2 sorting bowls.
• The caps are placed directly after the filler so that the bottles are covered all the way into the screw capper. Cap distributors on the filler.

Hood: Housing with ventilation of sterile air into the machine and laminar flow in the machine

Housing:  With guillotine doors that open upwards

Feeder

• Cork feeder ALX 10 for feeding the corks to the DELTA corker.
• Pneumatic capsule conveyor type A 900 for continuous feeding of screw caps to the rotary distributor.

Closures

• Natural corks for still wine
  Ø 24 mm x 38 – 60 mm
• Screw cap:
  MCA PP28 Ø 28 mm
• Screw cap:
  BVS Ø 30 mm x 60 mm

Also available

• Filler knot & vacuum pump.
• Rinser knot for STEAM.
• Infeed and outfeed conveyors with cap control.