Used Bottling Lines
Filling Monoblock
Ref: M180
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 0
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 1
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 2
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 3
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 4
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 5
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 6
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 7
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 8
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 9
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 10
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 11
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 12
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 13
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 0
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 1
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 2
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 3
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 4
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 5
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 6
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 7
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 8
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 9
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 10
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 11
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 12
  • Filling Monoblock Still Water Enoberg 24-24-6 N S 11.000 bph - 13
Technical specs
Rinser
No. of grippers:
24
No. of treatments:
Single
Filler
No. of valves:
24
Fill type:
Volumetric
Type of nozzle:
Fixed
Capper
Cap types:
Plastic  screw
No. of heads:
6
Cap size:
29/25
Details
Current state:
New
Safety features:
Yes
Manuals:
Yes
Rotation direction:
Counterclockwise
Electrical data:
V: 380 • Hz: 50
Technical specs
Rinser
No. of grippers:
24
No. of treatments:
Single
Filler
No. of valves:
24
Fill type:
Volumetric
Type of nozzle:
Fixed
Capper
Cap types:
Plastic  screw
No. of heads:
6
Cap size:
29/25
Details
Current state:
New
Safety features:
Yes
Manuals:
Yes
Rotation direction:
Counterclockwise
Electrical data:
V: 380 • Hz: 50

Description See more

Filling Monoblock for still water Enoberg – bottling machine

Integrated System Of Rinsing Filling And Capping Model Evf 24-24-6 N S Composed Of:

– Rotary rinser with 24 nozzles, for the rinsing of bottles.
– Rotary filler with 24 valves, for the electronic volumetric filling.
– Capper with 6-head/heads, for the application of plastic screw caps or pressure caps.
– Monoblock Bottling Machine pitch: 150,72 mm.
– Counter clockwise machine.
– Bottle conveying system Neck Handling.

Filling Monoblock: Key features

– ENOBERG Filling Monoblock distinguishes itself for its compact frame; which, enables to considerably simplify the operations of management; cleaning, and maintenance and ensures substantial space saving in the bottling line.
– Filling module equipped with electronic meters to ensure excellent precision.
– The working space of the machine is entirely made of stainless steel and glass, ensuring a high standard of hygiene.
– All the piping systems can be disinfected, suitable for use in foodstuffs.
– The optimal disposition of carousels within the frame enables to reduce of blind spots; with the subsequent, great advantage as
far as productivity is concerned.
– Neck Handling system for bottle conveying inside the machine.
– Transmission with toothed wheels.

Rinsing module:

– Rotary rinser with a single treatment and fixed nozzles for the inner cleaning of bottles.
– Mechanical grippers for bottles neck handling.
– Neck handling system for one format.
– Bottles overturning by the twist.
– Manifold for the distribution of rinsing liquid and blowing air to the nozzles.
– “No bottle-no spray” system as standard equipment.
– Rinsing treatment by water and final drip or blowing by air and deposit.
– Pressure switch for the machine stop in case of pressure reduction of the treatment product.
– Stainless steel frame.
– Machine pre-arranged for closed-circuit CIP, complete with manual dummy bottles (CIP unit excluded).

Filling module:

– Volumetric filling based on electronic meters (magnetic or mass meters on the base of the machine configuration);

How it works:

– Filling valve opening by electro-drive triggered by the bottle presence sensor signal (opening) and by the corresponding meter signal (closure).
– Contactless filling process between the bottle and the filling valve.
– Volume is set up in the operator’s control panel.
– Product-feeding tank standing outside the machine, readily accessible for inspection;
It’s complete with: pneumatic valve for product infeed, level control, washing spray ball, pump sending the product to the filling valves.
– Product-feeding pump (if installed) controlled by inverter, keeping constant pressure on the filling valves.

Central manifold distributing:

– Small-sized central manifold distributing the product from the main feeding pipe to the filling valves.
– Filling valves, central manifold, and distribution pipe manufactured in stainless steel AISI 316.
– Sealing rubbers comply with food industry regulations.

Bottle centering system:

– Bottle centering was placed beneath the filling valve, with no need of bottle lifting jacks.
– Gearboxes for the meter control mounted on the carousel, ensuring easy access and cable reduction (one gearbox every two
meters).
– Filling Monoblock pre-arranged for closed-circuit CIP (only for EVF models), complete with manual dummy bottles (CIP unit excluded).

Capping Module And Optional Cap Orientating/feeding System:

– Capping turret, suitable for the application of plastic pressure caps or screw caps (pre-threaded caps).
– Caps feeding system is placed outside the machine (centrifugal or water-fall feeding system) which delivers the caps, properly
oriented, to the machine feeding channel.
– Cap distribution from the descent channel to the capping heads by means of a “pick and place” device.
– Screw heads with the magnetic clutch with the possibility to adjust the locking torque (in case of screw caps) or pressure heads
with dedicated terminal (in case of pressure caps).
– Motor reduction gear is driven by an inverter for independent control of head rotation (for screw caps).

Main Structure – bottling equipment

– Drive motor and transmission systems placed in the upper base, fully insulated from the working environment.
– Transmission with toothed wheels.
– Height-adjustable machine output conveyor to suit different bottle sizes (in case of Neck Handling machine).
– Safety metal shield with window-style sliding doors equipped with magnetic safety switches.

Conveyors:

Will supply only the conveyor frame as the Filling Monoblock must be integrated into a complete line it is industry standard. That the supplier of the line conveyors would supply the conveyor chain, the drive/idler sprocket, motors, and invertors.

As a standard option is a possibility to control the motor inverters from the filling machine control panel (see quotation price list); although this is not mandatory. The control panel can manage up to a maximum of 4 external motors and can also propose the complete line.

Filler for still water operating principal:

At the Filling Monoblock inlet, the bottles are conveyed through a conveyor to the rinsing carousel by means of a star wheel. In the rinser, the bottles are overturned by a flush cam. While the bottles keep overturned, they are rinsed with water or blown with air.

In the rinsing carousel outlet, the bottles are turned in the usual position; then transferred to the filler by means of star wheels. The filler features a neck/bottom handling system.

Sensors – bottling machines

Part of this bottling machinery is a sensor detects the presence of the bottle before entering the filler; filling process starts only if a bottle is detected. The filling product is inside an external tank, from which it is pumped to the filling valves.

The filling process is electronic volumetric thanks to mass/magnetic flow meters depending on the conductivity of the filling product. The electronic meter is positioned at each filling valve upstream. Once the filling process has started, the electronic meters measure the number of products flowing into them.

The measurement is performed by pulses. When the electronic meter reaches the same quantity of pulses set on the recipe of the related format, it closes the filling valve.

Filler technical features, Electric, and mechanical specification:

In this bottling machines the full bottles are conveyed to the capping module by means of a star wheel. A dedicated optional device sorts the caps in the correct position. Then the caps reach the capping device through a conveyor. The capping head applies the cap on the
bottle. The capped bottles are conveyed, by means of a star wheel, to an outfeed conveyor, which allows the machine to work
bottles with different heights.

– Standard supply voltage and special supply voltage (available with additional charge for power transformer):
a) 380V+/- 5%, 400V+/-10%, 415V+/-10%: 3PH+N+PE;
b) 230V+/-5%, 440V+/-10%, 480V+/-5%, 575V+/-5%: 3PH+PE (50/60Hz).

Filling Monoblock installed power:

The transformer is required for:
1) supply voltage as per point a) when NEUTRAL is NOT supplied by the customer
2) TT/IT distribution systems
3) supply voltage as per point b)
– Frequency: 50/60 Hz.
– Secondary voltages: 24 V DC.
– Installed power: see layout attached.
– Machine manufactured in accordance with CE standards.
– Visible structural parts made of stainless steel AISI 304.
– Carousel-supporting bearing with centralized lubrication outside the machine.

Main components of the bottling machine:

– Automation and control: SMITEC.
– Main switches: ABB/LOVATO
– Remote switches: EATON/LOVATO
– Magneto-thermal switches: EATON/LOVATO
– Push-button station Ø 22 IP 65
– Limit switches: IP 67
– Proximity switches: IP 67
– Photocells: IP 67

Servo drivers and brushless servomotors: SMITEC
– Electrical panel with air conditioning: IP 54
– Communication system by Ethernet, based on serious Fieldbus
– Electrical wiring with pre-assembled and pre-tested cables
– Control electro valves: FESTO
– Flow meters: Endress+Hauser / Krohne

Man-machine Interface:

The POSYC control panel is a user-friendly system that allows easy and efficient use of the packaging machine. This is
possible thanks to the extremely intuitive interface, the touchscreen, and the advanced functions of diagnostics and real-time
technical support.

SPECIFICATIONS of the bottling equipment: Human-machine interface industrial PC, featuring IP 65 protection grade, Windows 10 IoT operating
the system, 7” touch screen LCD.

Motornet System Automation And Control System Of Filler For Still Water:

The hardware and software components of the filler for still water are open and modular in this bottling equipment.

Complying with the EC regulations and relying upon proven standards of the industrial field and of the packaging sector:  OMAC guidelines, SERCOS, PROFIBUS, IEC61131, OPC,
Industrial PC, Linux.

This, as far as the hardware is concerned, is made up of the following devices:

MARTS (process controller), man-machine interface, COSMOS (digital servo driver for brushless motors), and I/O modules (remote or through electric panel IP65).

The Motornet System automation and control system ensures:

– high outputs and high-quality products;
– constant control of parameters during the whole production cycle;
– machine parameters direct modification; the possibility of storing up to 200 different receipts;
– low machine noise;
– user-friendly technology and easy maintenance;
– automatic warning on the operator panel of programmed maintenance operations to be carried out;
– quick changeover;
– machine manuals available on the operator panel or the cloud;
– machine performance monitoring and down-times analysis (Pareto diagram);
– parameters direct printing possibility and transfer of production data to the customer’s control system by Ethernet & MODBUS/TCP protocol
– easy backup of installation parameters.

Filler for still water: Air compressed requirement

– Compressed air pressure at the installation entry: min. 8 bar.
– Compressed air purity at the installation entry: class 2.4.1 ISO 8573-1.
– Compressed air consumption: see the attached layout.
– Environmental temperature: min +10°C – max +35°C, with variances of ±3°C during the daily working activity.
– Maximum relative humidity (at the maximum recommended operating temperature): 70%.
– The stated values refer to installations within 2,000 m above sea level.

PET containers used in bottling machines:

– Container diameter/diagonal: min. 44 mm – max. 125 mm. (max. 215 mm for high-capacity containers on machines of the HC series).
– Bottleneck inner diameter: min. 21.7 mm – max. 40 mm.
– Bottle ring diameter: min. 30 mm – max. 44 mm (max. 55 mm for high-capacity containers on machines of the HC series).

– Bottle height under the bottle ring for NH conveying system: min. 140 mm – max. 340 mm (max. 408 mm for high-capacity containers on machines of the HC series).

– Bottle height for BH conveying system: min. 170 mm – max. 350 mm (min. 250 mm – max. 430 mm high-capacity containers on machines of the HC series).
– Bottleneck height: min. 10.5 mm – max. 27 mm.
In case of dimensions other than those listed above, it will be necessary a feasibility study by the technical department.

Filler monoblock for still water production:

– Filling temperature: 20°C
– Inner diameter of the bottleneck: 21.5 mm (PCO1881)
– Filling level: 35 mm
– Electrical conductivity > 10 μS / cm

Features of the recommended cleaning and disinfecting liquid for the filler for still water.
1. The use of unsuitable cleaning liquids that do not comply with the characteristics indicated below relieves the Seller from any responsibility. Both for any damage caused to the machine and, therefore, not covered by the machine warranty, and for malfunction.
2. Liquids suitable for the filler cleaning:
– caustic soda with a concentration rate between 1.5 and 3%; this with one temperature of </= 85°C;
– nitric acid with a concentration between 1 and 2% at room temperature;
– peracetic acid with a concentration rate between 0.2 and 0.5% at room temperature.

Interested in this machine?

    Company

    First Name

    Last Name

    Email

    Phone

    Country

    Message




    Read more about this machine type in this article.
    DISCLAIMER: The operational status of each machine is monitored on a monthly basis. Therefore we will promptly update the current status of the machine only at the time of your request.