Used Bottling Lines
Pasteurizer
Ref: PST08
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 1
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 2
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 3
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 4
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 5
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 7
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 8
  • Used Tunnel Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour - 9
Technical specs
Details
Current state:
Sold
Safety features:
Yes
Measurements:
L: 2200 mm W: 7100 mm
Electrical data:
V: 380 • Hz: 50
Technical specs
Details
Current state:
Sold
Safety features:
Yes
Measurements:
L: 2200 mm W: 7100 mm
Electrical data:
V: 380 • Hz: 50

Description See more

Used Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour

The pasteurizer was put to stop still working, it is very likely that only a change of seals may be required where required.

For start-up, the steam must be set with a flow rate of 120,000 Kcal / h and approximately 80,000 Kcal / h at full speed x 2000 bph.

*** NB consumption varies according to the capacity of the content and the pasteurization temperature, the indicated one is calculated on a 1.0L container with a temperature differential of 60 degrees and a cycle of 55 min.

Machine cycle times

Cycle time of the design machine for 500 cc bottles: 50 minutes divided as follows:

  • 1st Heating 8 min
  • 2nd Heating 8 min
  • Pre-pasteurization  6 min
  • Pasteurization 10 min
  • 1st Cooling 9 min
  • 2nd Cooling 9 min

Internal conveyor width 1100 mm
Full installed width 2200 mm

Wiring diagram available

Interested in this machine?

    Company

    First Name

    Last Name

    Email

    Phone

    Country

    Message




    DISCLAIMER: The operational status of each machine is monitored on a monthly basis. Therefore we will promptly update the current status of the machine only at the time of your request.