Used Bottling Lines logo

Pasteurizador

Ref: PST08
  • LPG INTERNATIONAL COMAC – REV2010 - 0
  • LPG INTERNATIONAL COMAC – REV2010 - 1
  • LPG INTERNATIONAL COMAC – REV2010 - 2
  • LPG INTERNATIONAL COMAC – REV2010 - 3
  • LPG INTERNATIONAL COMAC – REV2010 - 4
  • LPG INTERNATIONAL COMAC – REV2010 - 5
  • LPG INTERNATIONAL COMAC – REV2010 - 6
  • LPG INTERNATIONAL COMAC – REV2010 - 7
  • LPG INTERNATIONAL COMAC – REV2010 - 0
  • LPG INTERNATIONAL COMAC – REV2010 - 1
  • LPG INTERNATIONAL COMAC – REV2010 - 2
  • LPG INTERNATIONAL COMAC – REV2010 - 3
  • LPG INTERNATIONAL COMAC – REV2010 - 4
  • LPG INTERNATIONAL COMAC – REV2010 - 5
  • LPG INTERNATIONAL COMAC – REV2010 - 6
  • LPG INTERNATIONAL COMAC – REV2010 - 7
Detalhes
Tipo:
Túnel
Estado atual:
Vendida
Sistema de prevenção de acidentes:
Sim
Dimensões:
L: 2200 mm W: 7100 mm
Dados elétricos:
V: 380 • Hz: 50
Detalhes
Tipo:
Túnel
Estado atual:
Vendida
Sistema de prevenção de acidentes:
Sim
Dimensões:
L: 2200 mm W: 7100 mm
Dados elétricos:
V: 380 • Hz: 50
Full description

Interessado nessa máquina?










    Descrição

    Used Pasteurizer LPG INTERNATIONAL COMAC REV2010 2000 Liters per hour

    The pasteurizer was put to stop still working, it is very likely that only a change of seals may be required where required.

    For start-up, the steam must be set with a flow rate of 120,000 Kcal / h and approximately 80,000 Kcal / h at full speed x 2000 bph.

    *** NB consumption varies according to the capacity of the content and the pasteurization temperature, the indicated one is calculated on a 1.0L container with a temperature differential of 60 degrees and a cycle of 55 min.

    Machine cycle times

    Cycle time of the design machine for 500 cc bottles: 50 minutes divided as follows:

    • 1st Heating 8 min
    • 2nd Heating 8 min
    • Pre-pasteurization  6 min
    • Pasteurization 10 min
    • 1st Cooling 9 min
    • 2nd Cooling 9 min

    Internal conveyor width 1100 mm
    Full installed width 2200 mm

    Wiring diagram available

    ISENÇÃO DE RESPONSABILIDADE: o status operacional de cada máquina é monitorado mensalmente. Portanto, atualizaremos prontamente o status atual da máquina somente no momento de sua solicitação.