Blow Molding Machine
Ref: SO112Used Blow Molding Machine SMI SR10HP year 2015
Details
kw: 300kw
A: 494A
Related machines
Description
Used Blow Molding Machine SMI SR10HP year 2015
Firstly, the SMI SR10HP, produced in 2015, emerges as an advanced solution for PET container production. This analysis aims to detail its technical specifications and operational features. It significantly highlights the machine’s efficiency and productive capacity in industrial environments.
Productive Capacity and Versatility of the Blow Molding Machine SR10HP
Importantly, the machine achieves a remarkable speed of 22,000 BPH, showcasing its high capacity. It adeptly processes a variety of container sizes, including 0.20 L, 0.33 L, and 0.6 L, thereby offering considerable flexibility in production lines.
Configuration and Components
Moreover, it boasts ten cavities for simultaneous preform processing, which optimizes production time. Integrated systems, such as a loader, tipper, and unscrambler, automate preform handling. Consequently, these systems minimize manual intervention and significantly boost operational efficiency.
Technology and Innovation of the Blow Molding Machine SR10HP
Additionally, a compressor and chiller are crucial for controlling temperature and air pressure, ensuring the quality of PET containers. Furthermore, an air recovery system innovatively reduces energy consumption, highlighting a strong commitment to sustainability.
Standards and Compatibility
Equally important, the machine operates with 1881 neck type preforms, a widely accepted standard, ensuring compatibility with various bottling lines. Its rotary design facilitates high-speed production while maintaining high-quality standards, thereby ensuring reliability.
Operational Status and Safety
Currently, the Blow Molding Machine SR10HP is in operation and meets strict safety standards, effectively protecting operators. Provided manuals support efficient maintenance and optimal machinery use, enhancing operational longevity.
Electrical Data
On the electrical front, specifications require 380V, with a consumption of 300kW and an intake of 494A. This detail underscores the machine’s commendable energy efficiency.
It is important to note that during the refurbihìshment of this machine, these maintenence activities were made:
- Maintenance of oven pickup, holder & oven lamp unit
- Maintenance of inlet & outlet gripper & gripper unit
- Maintenance of all the bottom mould, linear bearing and CAM
- Maintenance of 4 blowing station
- Maintenance of Main carousel motor, gear box with supporting unit
- Done assembly work in gear box unit
- Done the service for removed mould stations and fixed
- Assembled Inlet and outlet gripper CAM
- Dismantled elevator unit
- Installed new conveyor belt and sub assembly of elevator
- Installed new air filter for high pressure unit
- Maintenance of remaining blowstations
- Done the service for blowing stations
- Oven exhaust fan removed and cleaned
- Installed the blowing stations and completely Maintenance of two blowing stations
- Installment of the valves and solenoid coils
- Done the complete service for inlet gripper unit
- Maintenance of water distributor and make service and install it
- Service air distributor and install it
- Service outlet gripper unit
- Installment out let gripper cam unit
- Installment inlet and out let grippers
- Open and clean oven cooling system
- Open and check electrical distributor
- Changement of the two mould stretch rod dive belt
- Installment of the inlet and outlet gripper unit
- Installment electrical distributor
- Change damage pipe ni water distributor
- Change stretch rod belt
- Installment complete blowing station
- Installment preform pick up and guide
- Installment and clean all oven lamp
- Installment blowing wheel drive unit
- Installment 8 pcs bottom cam bearing
- Elevator belt adjustment
- Stretch rod fix Bottom cam fix
- Installment 2pcs bottom cam bearing
- Check all bottom cam
- Preform pick upper and guide installment
- Trial run
- Cleanining of coil and valves are not function
- Cleanining of blowing valve in mould no:2
- Making trail run in 200 ml
- Making trail running
- Mould no:10 not working stretch rod
- Mould no :2 blowing valve not working
- Order spare part to replace the damage part
Conclusion
In conclusion, the 2015 SMI SR10HP machine stands out for its productive capacity, energy efficiency, and technical sophistication. With a strong focus on sustainability, it represents an ideal choice for industries seeking reliable, high-quality solutions for PET container production.