Used compressor Siad Tempo 2004

Full maintenance in early 2022, 2000 working hours of autonomy until the next routine maintenance deadline for this Siad HP compressor 1500 HP compressor.

OIL FREE AIR COMPRESSION UNIT with a capacity of 1500 m³/h having the following main working data:

‑ gas to be compressed	air
– electric feeding	380 V +/-5% 50 Hz
Suction conditions
– altitude	500 m.s.l.m.
– temperature min./max. internal	10/35 °C
– temperature min./max. external	-5/45 °C
– relative humidity	50 %
– wet bulb	26 °C
Delivery Conditions
-max. pressure	42 bar
‑output at suction conditions	1500 m³/h
‑pneumatic part working	dry
‑rotation speed	750 rpm
‑average piston speed	3,75 m/sec
-electric motor	4 poles
– installed power	315 kW
‑shaft power	270 kW
-electric motor execution	IP 23
-coupling	V-belts
‑ cooling:	water
– T inlet/outlet water	10 °C approx
-approx. water requirement	27 m³/h

Structural features of the Used compressor Siad:

The pneumatic part consists of three-cylinder lines and double-acting pistons.

Geometrical data of the Siad HP compressor:

‑Stroke	150 mm
‑1st stage	440 mm
‑2nd stage	240 mm
‑3rd stage	130 mm

The Used compressor Siad will be supplied complete with:

• suction filter capacity of 10 microns

• safety valve at each stage of delivery

• pressure gauge at each stage of delivery

• oil pressure and temperature gauge

• crankcase lubrication group with oil pump, single oil filter, oil cooler our standard type, automatic lubricating pump

• cooling water piping

• interstage air piping in stainless steel

• inter and after coolers

• pulsation damper/moist separator in carbon steel internally treated with cataphoresis coating (stainless) after each stage delivery

• with automatic condensate traps “Siadcoin” type, on each moisture separator, complete with an insulating valve

Central Skid including:

• water pump

• expansion vessel

• flexible houses

Oil heater of Siad Compressor:

Set of special vibration-damping supports to be placed between the steel baseplate and the floor.

Siad HP compressor supports do not require stable fixing to the floor but are only positioned by means of pads included in the supply.
With supports will be supplied a set of flexible hoses for air and water connections.

Electric driving and control panel PLC standard suitable for the automatic running of the compression line.

ACCESSORIES including:

Air drying unit HPD 340 of Siad HP compressor