Description

Used compressor Siad Tempo 2004

Full maintenance in early 2022 of this Siad HP compressor, 2000 working hours of autonomy until the next routine maintenance deadline for this Siad HP compressor 1500 HP compressor.

OIL FREE AIR COMPRESSION UNIT with a capacity of 1500 m³/h having the following main working data:

‑ gas to be compressed

air

– electric feeding

380 V +/-5% 50 Hz

Suction conditions

– altitude

500 m.s.l.m.

– temperature min./max. internal

10/35 °C

– temperature min./max. external

-5/45 °C

– relative humidity

50 %

– wet bulb

26 °C

Delivery Conditions

-max. pressure

42 bar

‑output at suction conditions

1500 m³/h

‑pneumatic part working

dry

‑rotation speed

750 rpm

‑average piston speed

3,75 m/sec

-electric motor

4 poles

– installed power

315 kW

‑shaft power

270 kW

-electric motor execution

IP 23

-coupling

V-belts

‑ cooling:

water

- T inlet/outlet water

10 °C approx

-approx. water requirement

27 m³/h

Structural features of the Used compressor Siad:

The pneumatic part consists of three-cylinder lines and double-acting pistons.
Geometrical data of the Siad HP compressor:

‑Stroke

150 mm

‑1st stage

440 mm

‑2nd stage

240 mm

‑3rd stage

130 mm

The Used compressor will be supplied complete with:

• suction filter capacity of 10 microns
• safety valve at each stage of delivery
• pressure gauge at each stage of delivery
• oil pressure and temperature gauge
• crankcase lubrication group with oil pump, single oil filter, oil cooler our standard type, automatic lubricating pump
• cooling water piping
• interstage air piping in stainless steel
• inter and after coolers
• pulsation damper/moist separator in carbon steel internally treated with cataphoresis coating (stainless) after each stage delivery
• with automatic condensate traps “Siadcoin” type, on each moisture separator, complete with an insulating valve

Central Skid of Siad HP compressor including:

• water pump
• expansion vessel
• flexible houses

Oil heater of Siad HP compressor:

Set of special vibration-damping supports to be placed between the steel baseplate and the floor.
Siad HP compressor supports do not require stable fixing to the floor but are only positioned using pads included in the supply.

Electric driving and control panel PLC standard suitable for the automatic running of the compression line.
ACCESSORIES including:
Air drying unit HPD 340 of Siad HP compressor

Interested in this machine?