Used Bottling Lines logo
Venduta
×
  • Photo #1SIAPI EA3

Soffiatrice

Rif: SO53

Soffiatrice SIAPI EA3

Venduta
Costruttore:
Siapi
Modello:
EA3
Anno:
2005
Velocità:
3000 bph
Prodotti:
Aceto, Acqua, Acqua frizzante, Alcool, Bevande analcoliche, Birra, Detergenti, Distillati, Latticini, Olio, Spumante, Succo, Tè, Vino fermo, Vino frizzante
Contenitori:
PET

Detagli

Protezioni antinfortunistiche:
Manuali:
Ore macchina:
712 ore
N° di cavità:
3
Elevatore:
Ribaltatore preforme:
No
Unscrambler:
Compressore:
No
Chiller:
No
Tipo collo preforma:
Max 45/55 mm
Sistema di recupero aria:
No
Dati elettrici:
V: 480V
hz: 60hz
A: 83A
Peso:
5000 kg
Tipo:
Lineare

Soffiatrice

Rif: SO53

Soffiatrice SIAPI EA3

Venduta
Costruttore:
Siapi
Modello:
EA3
Anno:
2005
Velocità:
3000 bph
Prodotti:
Aceto, Acqua, Acqua frizzante, Alcool, Bevande analcoliche, Birra, Detergenti, Distillati, Latticini, Olio, Spumante, Succo, Tè, Vino fermo, Vino frizzante
Contenitori:
PET
Richiedi informazioni
Ulteriori informazioni, foto e layout sono disponibili per ogni macchina. Clicca su "Richiedi informazioni" nel caso avessi bisogno di più dati.
ATTENZIONE: Lo stato operativo di ogni macchina viene monitorato mensilmente. Pertanto aggiorneremo tempestivamente lo stato attuale della macchina solo al momento della tua richiesta.

Descrizione

Neck: Max.45/55 mm.
Production: 4000 bph
Max volume: 9.000 ml.
Mold pitch 160 mm
Machine. operating 24 hours – well maintained
Automatic cycle time: 712 h – Blown bottles: 1278324
The machine is in good general condition in terms of maintenance and use.
In general, it does not require, at least visually, extensive maintenance, from verification made on
our archives, the customer has acquired very few components over time and not functional
groups, has independently provided for maintenance.
The machine has worked in automatic cycle for only 712h, needs a general cleaning especially
in the toggle part, movement bottoms and ironing, at least from what you could see, here are
some general considerations on the status of some fundamental groups:
• press and toggle are in good condition,
• planned progress does not highlight particular criticalities,
• ironing in good condition, recommended replacement of gaskets
• blowing system we recommend the replacement of blowing valves and maintenance of pressure
reducers
• transport in good condition, in particular straps and gearmotors do not show any particular wear
• oven requires cleaning, to be evaluated if necessary replacement lamps (they are expensive as
Adphos with NIR technology
• preform load, we recommend maintenance of skids and cylinders even if there are no particular
problems
• container unloading, recommended evacuation belt replacement even if it is not particularly
critical


Ti interessa questa macchina?