Used Bottling Lines logo

Sopradoras (PET)

Ref: SO54
      Detalhes
      No. de cavidades:
      4
      Carregador de pré-formas:
      Sim
      Basculante de pré-formas:
      Não
      Orientador de Pré-formas:
      Sim
      Compressores:
      Não
      Enfriadoras:
      Não
      Tipo de pescoço pré-forma:
      Max.45/55 mm
      Sistema de recuperação de ar:
      Não
      Tipo:
      Linear
      Estado atual:
      Vendida
      Sistema de prevenção de acidentes:
      Sim
      Manuais:
      Sim
      Horas da máquina:
      41907
      Peso:
      5400 kg
      Dados elétricos:
      V: 480 • Hz: 60 • A: 136
      Detalhes
      No. de cavidades:
      4
      Carregador de pré-formas:
      Sim
      Basculante de pré-formas:
      Não
      Orientador de Pré-formas:
      Sim
      Compressores:
      Não
      Enfriadoras:
      Não
      Tipo de pescoço pré-forma:
      Max.45/55 mm
      Sistema de recuperação de ar:
      Não
      Tipo:
      Linear
      Estado atual:
      Vendida
      Sistema de prevenção de acidentes:
      Sim
      Manuais:
      Sim
      Horas da máquina:
      41907
      Peso:
      5400 kg
      Dados elétricos:
      V: 480 • Hz: 60 • A: 136
      Full description

      Interessado nessa máquina?










        Descrição

        Neck: Max.45/55 mm.
        Production: 5000 bph

        Max volume: 8.000 ml.
        Mold pitch 200 mm
        Machine. operating 24 hours – well maintained

        Automatic cycle time: 41907 h – Blown bottles: 107.689.755

        The machine is in good general condition in terms of maintenance and use.

        In general, it does not require, at least visually, extensive maintenance, from verification made on our archives, the customer bought in 2009 some components of the manipulator, the pantograph, rack and some ironing components, also in this case autonomously provides maintenance.

        The machine needs a general cleaning in the zones of greasing movement bottoms, toggle and ironing from what has been seen, following some general considerations on the status of some fundamental groups:

        Transport – heating in good general conditions, we recommend replacing the spindle insertion cam, installing the spindle insertion safety device.

        Spindles in good general condition.

        Load group does not require maintenance.

        press and kneepads are in good general condition, probably the toggle maintenance was made by them with their components.

        planned progress does not highlight particular criticalities,

        ironing in good condition, recommended replacement of gaskets, rack and pinion are in good condition.

        blowing system we recommend the replacement of blowing valves and maintenance of pressure reducers.

        oven requires cleaning, to be evaluated if necessary replacement lamps (they are expensive as Adphos with NIR technology).

        Bottom movement does not seem to be critical, to check the idling pins with respect to the cams, if the cams are reversed.

        preform load and belt transmission, there are no particular critical points.

        manipulator fluid movements, no problems are highlighted, it is the only existing manipulator with pinion feed – rack, some components for maintenance were supplied in 2009, to replace the cable chain.

        pantograph in good condition.

        preferential oven requires a cleaning and replacement of lamps without gilding.

        in-line unloading has been eliminated and replaced by a conveyor belt, to be kept in mind that the exhaust system, presently present in the machine, does not guarantee that the containers remain standing on the belt.

        ISENÇÃO DE RESPONSABILIDADE: o status operacional de cada máquina é monitorado mensalmente. Portanto, atualizaremos prontamente o status atual da máquina somente no momento de sua solicitação.