Monoblocs de encaissement
Réf: MBI05
Monoblocs de encaissement SMI GROUP WP300
Vendue
Fabricant:
SMI GROUP
Modèle:
WP300
Année:
2005
Vitesse:
50000 Bouteilles par heure
Produits:
Alcool, Bière, Boissons non alcoolisées, Champagne, Détergents, Eau, Eau pétillante, Esprits, Huile, Jus, Laitier, Thé, Vin, Vin pétillant, Vinaigre
Récipients:
Brik, Canette, PET, Poche, Pot, Verre
Formats:
0.5 L, 1.0 L
Détails
Des dispositifs de sécurité:
Oui
Manuels:
Oui
Dimensions:
Largeur: 13120mm
Longueur: 1940mm
Taille: 2950 mm
Nombre de prises:
24
Croisillonneuse:
Oui
Entrée:
Droit
Type de fermeture:
Ruban adhésif
Type de têtes:
Fixé
Monoblocs de encaissement
Réf: MBI05
Monoblocs de encaissement SMI GROUP WP300
Vendue
Fabricant:
SMI GROUP
Modèle:
WP300
Année:
2005
Vitesse:
50000 Bouteilles par heure
Produits:
Alcool, Bière, Boissons non alcoolisées, Champagne, Détergents, Eau, Eau pétillante, Esprits, Huile, Jus, Laitier, Thé, Vin, Vin pétillant, Vinaigre
Récipients:
Brik, Canette, PET, Poche, Pot, Verre
Formats:
0.5 L, 1.0 L
Demander des renseignements
De plus amples informations, photos et mises en page sont disponibles pour chaque machine. Cliquez sur "Demander des informations" au cas où vous auriez besoin de plus de données.
DISCLAIMER : L'état de fonctionnement de chaque machine est surveillé mensuellement. Par conséquent, nous mettrons rapidement à jour l'état actuel de la machine uniquement au moment de votre demande.
Description
There are many original spare parts with machine
Machine in perfect condition
On the machine’s inlet conveyor belt, featuring low-friction chains made of thermoplastic material, a specific group of motorized oscillanting guides accurately lines up the loose containers moving towards the pack formation zone, where the containers are clustered in the selected format through electronically synchronized fingers, operating in continuous motion.
The new Easy-Load system automatically loads cardboard blanks into the dedicated blank magazine of the machine. The new loading device is made up of a group of motorized mat-equipped conveyor belts on which the operator easily places the cardboard blanks in uniform horizontal stacks.
A corrugated cardboard blank is picked from the blank magazine by a newly designed picker equipped with vacuum suction cups; then, the carboard blank is carried up along the blank ramp and positioned under the incoming pack collation with short side leading. The tray/case former features a continuous wrap-around system.
The flap folding devices fold the blank’s side flaps and then the upper/lower flaps of both the front and back side of the pack. The hot melt glue sealing ensures an excellent resistance of the pack.
At the machine outlet, the pack walls are pressed by special guides.
- Machine bearing frame made of sand-blasted and powder-painted steel
- The machine is equipped with sliding protection doors in anodised aluminium featuring a rounded shape which let all the motors (featuring low energy consumption) be placed externally if compared to the mechanical groups they activate. The closing system of doors is equipped with a slow-down device, which accompanies the door smoothly in its final phase of closure
- Absence of gearboxes and prevailing employment of ICOS brushless motors equipped with digital servo-driver integrated into the motor
- Continuous motion product grouping device, with electronically synchronized fingers made of plastic material
- For life lubricated bearings
- Infeed conveyor with chains made of thermoplastic material featuring low friction coefficient and a motorized system of oscillanting laning guides
- Cardboard magazine situated beneath the infeed conveyor, adjustable according to the blank size
- Cam-operated cardboard blank picker equipped with vacuum suction cups system
- Machine electrical cabinet with air conditioner
- POSYC® control panel mounted man-high and running the whole length of the machine (fixed on AFW/LSK/LSK SF/LWP models)
Modular design
SMI machines are designed according to advanced principles of module assembly and feature interchangeable mechanical and electronic components, which ensure a reduction of the down-times during technical interventions or programmed maintenance and the optimization of the use of spare parts on stock.
Operational flexibility
SMI machines can package a wide range of products in several pack collations, so as to effectively meet the end user’s current and future requirements. Moreover, each machine can be equipped with additional devices, which increase its basic functions and ensure a high level of customization of the final package.
Motors directly connected to the drive shafts
SMI machines do not include gearboxes: the motors are directly connected to the drive shafts. The consequent advantage is the reduction of maintenance, energy consumption and noise.
Continuous motion pack formation
The continuous motion packaging system ensures a fluid production process and protects the containers from strokes, thus granting more reliability, a better quality of the pack and a reduction of mechanical wear.
Thermoplastic material dividing pins
In the pack formation zone, the use of dividing pins made of thermoplastic material, which last longer than those made of metal, reduces the machine noise and protects the fragile containers (such as glass containers) and their labels.
Easy and low-cost maintenance
The rounded protection doors of ERGON models allow broader space inside the machine and thus the motors can be mounted externally on the machine side edges. Therefore, they are easily accessible and reachable for maintenance. Actually, the operator doesn’t need to enter the internal parts of the shrink wrapper when carrying out manual interventions.
New shapes
All of the models of SMI case packers can realize hexagonal or octagonal microflute/miniflute cardboard cases, which can be subject to more sophisticated printing processes, as compared to the standard corrugated cardboard.
Perfect cases
SMI case packers are equipped with fixed guides, which press the pack walls at the machine outlet. This system ensures a perfectly balanced, resistant case, whereas the rotary chain pressing systems can not guarantee the same quality level.
“User-friendly” man-machine interface
The POSYC® control panel, sliding on a boom running the whole length the machine, is very easy to use, thanks to the intuitive interface, the touch screen and the diagnosis functions and real-time technical support on the POSYC®.
