Used MBF Filling Monoblock 2001

Used MBF Filling Monoblock with the following components:

• 16 plier rinsing machine with a single treatment.

Carousel grippers are electronically variable in height.

• Filler 20 valves with light depression in bell,

Electrically variable height of supply tank.

Bottle lifting pistons with mechanical springs.

Tap level adjustment through central gearing.

• 3 head straight cork capping machine,

With vacuum and gas before closing.

Electrically variable height head.

• Level control system with logics and controls

Base frame in painted iron and then with stainless steel casing.

Accident prevention protections on the whole machine perimeter.

Bottles entry from left

Production about 3,500 bottles / hour

Year 2001 of the brand CE

Used until December 2021

3 formats for bottle equipment

Specifications – Used Filling Monoblock MBF

SLVB01 MACHINE BASE – SYNCHROFILL Automatic group with slight depression, construction MBF model SYNCHROFILL 960.16UFT1 / 960.20LV / 360.3R for rinsing, filling and capping of wine.

The machine consists of:

Rinsing machine with 16 fixed nozzle clamps Filling machine with 20 taps Capping machine with 3 heads per cap

Suitable for glass bottles with the following dimensions: max ø : 120 mm.

min ø: 52 mm. Max height: 360 mm. Min height: 190 mm. Product: wine

Production: 3.500 bottles / hour. Bottle capacity: 0.75 L. Straws ø: 15 mm.

Machine base

The machine base frame is welded steel, sandblasted and protected by several coats of epoxy paint. It is entirely coated with stainless steel. The mechanical parts that rotate the machine are housed inside the frame.

It has a large sized electric motor controlled by an inverter.

Manual lubrication with greasers. The greasers of the static parts are positioned on an easily accessible block.

Electrical panel made of stainless steel, positioned on the side of the machine, complete with:

Electromechanics and command buttons

Analog manometers

Transparent safeguards with stainless steel frames integrated into the base structure.

Each safeguard is equipped with a safety microswitch.

Rinsmatic rinsing turret with 1 treatment

• with 16 pliers
• max bottle diameter: 120 mm, neck diameter: 36 mm, weight 1 kg, height 360 mm.
• minimum bottle height: 190 mm.

Primitive diameter 960 mm. Water supply pressure 4 bar

Water characteristics recommended hardness max 5 °fH (about 20 ppm)

Filtering: 0.45µ absolute

Consumption 500 l/h

FILLTOWER – FILLMATIC 20LV

The filling turret consists of:

Supply tank made entirely of AISI 304 stainless steel.

All surfaces of the tank are machined and the parts in contact with the product are further polished.

The bottom of the tank is inclined to help complete drainage of the liquid at the end of the operation and / or during sanitization.

The taps are made of AISI 316 stainless steel, with 40 mm level adjustment, central liquid shut-off valve and gasket; deformable membrane gasket for the safest sanitation; complete with bottle centering cone as standard.

Manual tank height adjustment.

Control of the liquid level in the tank by means of a conductive probe.

An ON / OFF signal is available to control the product feed pump.

Depression system consisting of centrifugal blower, vacuum gauge and vacuum regulation valve.

Feeding of the product from the top

Manually operated external washing device for taps and bottle lifting plates.

They intercept the air intake in the absence of the bottle.

Capping turret components:

• Feeding hopper for static corks;
• Pipes and cork drop conveyors for cork measurement;
• Cork release in presence of bottle;
• Compression box with cork compression elements;
• Cork prestressing system, powder blowing, rapid corking.