Technical specsSee more
Technical specsSee more
Description See more
Used Heating/Cooling unit F&P Machinery LFPL-1 (HTC-HC) year 2010
250 ml ø 55 mm; h 168 mm
500 ml ø 68.5 mm; h 210 mm
1000 ml ø 85 mm; h 260 ml
1500 ml ø 96,6 mm; h 310 mm
2000 ml ø 105 mm; h 340 mm
250/500 ml bottle – 8.000 Bph
1000 ml bottle – 6.000 Bph
1500 ml bottle – 4.000 Bph (assumed)
2000 ml bottle – 3.000 Bph (assumed)
Tunnel includes 3 sections.
Nr. 1/3 section
Water in each section pump of each section water spraying pipe of each section repeat.
Cooling tower water overflows from section 3 to section 1 and will be sent back to customer’s cooling tower water recycling piping system & cooling tower by customer’s pump.
Supply water temperature: 15°C ~ 28°C, cooling tower water max 32°C.
Power: 380V, 3 phases, 50 Hz. Auxiliary power 220 V. 1 phase 50 Hz & DC 24 V.
Compressed Air: 6 Kg/cm2, oil free & dry air
Machine body dimension: L x W = 5200 x 3446 mm
Total machine width: to be confirmed, within 4300 mm
Total machine height: 1800 mm. Except blower & motor
Conveyor height: based on 1200 mm ± 50 mm
Basic machine feature
• Tunnel body, SUS 304 3t, plate. Tunnel bottom support SUS 304 angle bar. Constructed by tig welding. Each section is connected & fixed by bolt on the flange.
• Round type sight glass (window): installed at two side of tunnel wall, removable type, can be took apart.
• Maintenance manhole: installed at one side of tunnel tank wall, hinge type
• Plastic modular belt conveyor: W3352.8 mm (120”) model 3110, pp material, temperature tolerance 4°C – 104 °C (REGINA)
• Main driving motor / reducer , 0.375 Kw (SEW), 1 set.
Driving & idle square shaft: SUS 304, one piece type belt sprocket
Note: speed control by inverter (DANFOSS)
• Water spraying pump x 3 sets (G.S.D. Taiwan)
Pump shell: fc, shaft & impeller SUS 304, model GPS series
• Spray nozzle on the water spraying pipe
SUS 304 60 degree spraying nozzle and pipe
Round water spraying pipe, one terminal is fixed with main pipe by clamp / packing, the other terminal is fixed on pipe support type clamp.
Pipe can be removed from inside of tunnel
• Water, overflow & draining pipe: SUS 304 material, tig welding and flange type connector. Water main pipe with ball valve & pressure gauge.
• Water supply valve: SUS 304 on/off type pneumatic butterfly valve and SUS 304 manual butterfly valve for each section
• Motor/blower at tunnel outlet side: 2 sets, 3.8 Kw blower with air pipe should be attached at the end of the tunnel and blow water should be down inside into the last section.
The height of the blower is adjustable.
• Tank water level detector (OMRON)
• Temperature controller 3 sets (WEST ENGLAND).
Temperature probe RTD model: PT100Ω 8 sets
• Control panel: SUS 304 casing, inverter (DANFOSS), PLC (SIEMENS).
Main electric & control components (Telemecanique), SUS 304 cable duct.
• Pressure switch to detect low compressed air supply pressure
• Packing (Gasket) on the machine & piping
Between section: silicone
Steam/water pipe with flange: Teflon
Water pipe with clamp: EPDM