Used Complete Bottling Line Alfatek 2018

HPE – HIGH-PRESSURE ELECTRONIC FILLING MONOBLOCK – CROWN CAPPER ALFATEK® Mod. 9/1

This machine is suitable for bottling fermented beer in the autoclave.

The complete bottling line for wine and beer is supplied ready with connection points for air, product, discharge point and electrical connection.

• Max. production: 900/1000 BPH with carbonated product for 0,33l bottles.
• Maximum valves flow rate: 1250 l/h
• Maximum machine rotation speed 400-2000
• Filler pitch diameter: 600 mm
• Capper pitch diameter: 410 mm
• Maximum bottle diameter: 115 mm
• N.B.: Production may vary according to the type of product to be bottled, bottling pressure, product temperature, type of bottle, etc.
• Condition of the beer product:
  a) constant and adequate pressure
  b) constant temperature 0° -2 °
  c) rested product not overflowing

  Composition

• FILLER Series BHPE ELECTRONIC ISO BARICA HIGH PRESSURE 9 valves
• SINGLE-HEAD TURRET FOR CROWN CAPS
  Model EAGLE/C

– Voltage: 380V – 50hz
– Direction of rotation: Clockwise (Bottles from left to right)
– Electrical panel position: Left
– Control panel plate language: Italian
– Worktop: 1000 + – 50

Bottle size:
– Height: from 230 to 360 mm.
– Diameter: from 58 to 110 mm.
– Bottleneck diameter: from 16 mm (int.) to 30 mm (ext.)
– Level variation in bottles. : from 40mm to 75mm
– Bottleneck height: H. level + 30 mm
– Box for conveyor belt: 100×100 mm.
– Conveyor belt chain: 82.5 mm metallic slat, straight.

Used Complete Bottling Line Alfatek can only be unloaded with a suitable forklift
with a fork length of no less than 1,400 mm long.
Complete with safety guards in accordance with CE standards and equipment for a single cylindrical bottle format.

COMPONENTS

• Accident prevention protections in accordance with CE standards
• Manually adjustable tank height
• Ring-type tank that can be completely opened at the top
• Bottle holder pistons are completely in AISI stainless steel 304 anchored high
• Non-compressed air mechanical pistons tested for working pressures of 6 atm.
• Delayed operation of the pneumatic valve at the inlet product
• Thermometer for temperature control
• Parking lung under inert gas pressure
• Ethernet socket for ADSL connection for remote control

QUANTITY DESCRIPTION

* product booster pump (at constant pressure) excluded – necessary in case higher pressure has to be reached than the max. allowed by the autoclave.
* cap lifter excluded

FILL TANK SUPPLEMENT HIGHLY POLISHED INTERNALLY

A FOAMING UNIT installed between filler and capper is necessary to guarantee a low oxygen pickup in the beer, to eliminate the oxygen present in the headspace

Consisting of:
– High-pressure centrifugal pump with the start command
stop from the touchscreen- Bottle presence unit with Fcl + solenoid valve with liquid control
– Flow rate control via needle valve placed on the pipe water outlet
– 10″ microfiltration housing in 316 stainless steel for the application of a 0.2-micron microfiltration filter, to make the water sterile (cartridge not included in the supply)
Water outlet pressure 0.5 -3 bar
Nozzle outlet hole 0.5 mm

ACCESSORIES

FOR CROWN CAP SIZE CHANGE
ADDITIONAL EQUIPMENT for a cylindrical bottle
PHOTOCELL INPUT/OUTPUT
SUPPLEMENT FOR ACCIDENT PREVENTION PROTECTION DOORS IN GLASS INSTEAD OF LEXAN

PLANT FOR THE HANDLING OF
TRIBLOCK (max. 6 meters of chain)
– Drive head with suspended motor-modulator. (0.37 kW);
– Return head suspended;
– M. 1 conveyor belt (in addition to the one inside the machine)
– M. 2 chain for conveyor belt (beyond the internal one to the car)
– Conveyor motor control panel in compliance with CE standards, on the conveyor, with start, stop and emergency buttons.

END TABLE PLACED AFTER THE
BOTTLING MONOBLOC
size 500x1000mm

LINEAR ADHESIVE LABELLER ENOS Mod. “COMPACT”

Used Complete Bottling Line Alfatek suitable for applying body labels on bottles round or wraparound label, with an electronic speed modulator.
Machine complete with conveyor belt for insertion into a bottling line.
Machine in satin stainless steel.
Labeller with compressed air.
Technical features:
Production: 600 – 2500 b/h
Net weight: 200 Kg
Worktable: 1000mm ±
Voltage: 380 v

EQUIPMENT FOR APPLYING THE BACK LABEL ON THE SAME ROLL
PRINTER Mod. DATA suitable for thermal transfer overprinting on the label or back label, with area
28x18mm print