Used Bottling Lines logo

Filling Monoblock

Ref: M105
      Details
      Rinser
      No. of grippers:
      12
      No. of treatments:
      Double
      Filler
      No. of valves:
      12
      Fill type:
      Isobaric
      Type of nozzle:
      Fixed
      Isobaric valve:
      Electronic
      Capper
      Cap types:
      Crown cap
      No. of heads:
      1
      Current state:
      Sold
      Safety features:
      Yes
      Manuals:
      Yes
      Rotation direction:
      Clockwise
      Details
      Rinser
      No. of grippers:
      12
      No. of treatments:
      Double
      Filler
      No. of valves:
      12
      Fill type:
      Isobaric
      Type of nozzle:
      Fixed
      Isobaric valve:
      Electronic
      Capper
      Cap types:
      Crown cap
      No. of heads:
      1
      Current state:
      Sold
      Safety features:
      Yes
      Manuals:
      Yes
      Rotation direction:
      Clockwise
      Full description

      Interested in this machine?










        Description

        Product description
        Automatic monobloc in stainless steel with FLAT stainless steel frame made of:
        [1] 12 Two phases rinser-blower Ø mm 720 (example water + gas) in stainless steel for bottles with 115mm max diameter. A gripper device takes the bottle by the neck and – through a system of sprocket-wheel-rack pushed by a cam – turns it upside down. The nozzle enters in to the bottle neck for 75 mm. The injection takes place only in bottle presence. There is no contact between the bottle neck and the injector parts.The two injection system are completely separated. The calibration and duration of the injections may be adjusted through an external cams system. The dripping water is recovered in a closed circuit without wetting the machine. The pincers then go back to normal position and opens letting the outlet star place the bottle on the conveyor belt.
        [2] 12 Filler with high pressure electropneumatic annular tank for bottles with 115mm max diameter Øp mm 720.
        Each valve is equipped with:• Inductive sensor for bottle presence and cycle start.• Pressure transducer to signal bottle vacuum and pressure (the valve does not fill if the bottle does not reach the tank pressure).• Vacuum circuit electro-pneumatic valve.• Electro-pneumatic valve for pressure compensation with tank gas.• Auto-levelling circuit electro-pneumatic valve• Degassing circuit electro-pneumatic valve• Double effect electro-pneumatic circuit to open/close gas return circuit• Double effect electro-pneumatic circuit to open/close liquid circuit• The filling level can be adjusted from the control panel with adjusting range between 25 and 100mm from the top of the mouth with no manual intervention. Every valve has a dummy bottle for the cleaning• and sterilization of the machine. The placing of the dummy bottles is automatic with cycle handled from the control panel.• Every valve can work both sparkling liquids up to 8 Bar and still liquids up to 0 Bar.The filling level is precise even without using the auto-levelling circuit. The filling valve closing let an easy de-gassing even with difficult products and it allows the bottling of sparkling liquids at environment temperature.• The filling valve is protected by patent n° TO2012A000869.• All circuits are canalized (even the degassing one).• The filler has a sterilizing CIP circuit.• The filler has an analogic level feeler suitable to administrate the feeder pump inverter (the pump is not included in the price list).• Double pre-evacuation of the bottle: air suction from the bottle, injection of CO2 under pressure, suction before pressure equilibration with the gas in the tank. This allows to eliminate 99% of oxygen. For water recirculation, a liquid ring pump with tank is used.• Liquid ring pump with tank for recirculation with thermocoupling, level sensor and electrovalve to handle temperature and water level in tank.• Tank gas pressure and bottle levelling handled by PLC.• Filler spouts centring with movement and cam to centre bottle neck on the inlet star.• The filler has spouts automatic washing in case of bottles breakages.• Mechanical bottles lifting pedestals with cam return and automatic lubrication.• A light water jet causes beer foam before crown capping.
        [3] Single head 4270 crown capping fed by vibration.
        It is possible bypass the rinser and/or corker and/or capper rotation automatically from the control panel. The inlet and the transfer among the stations are granted by infeed screws that lead and synchronize the bottles.
        The monobloc is equipped with:- Safety guards in accordance with CE standards with tempered glass doors.- Universal infeed screws.- Sides motor adjustment.- Centralized dummy bottles for rinser sterilization.- Electrovalves kit to switch gas and washing liquid entrance and discharge liquid of the circuit after washing cycle.- PLC and operating terminal (touch screen).- Electrical height adjustment of all station.- Capsule/cork presence device.- Equipped for one type of cylindrical bottle.
        Output (1) 1100 litres/hourSpeed 1000-3000 bottles/hour
        Effective yield depends on many factors, among which: A) type of product; B) pressure of bottling; C) temperature of bottling; D) type of bottle
        Manufacturer:GAI S.p.A.
        Model:3031 FE BIER

        DISCLAIMER: The operational status of each machine is monitored on a monthly basis. Therefore we will promptly update the current status of the machine only at the time of your request.